Re: ROBolop Design (bmw e46)
Here you can see how I mounted the cover of the speakers without seeing anything of it.
On the backside I screwed 4 aluminum plates, and when you look closely , you'll see a little pin (3mm) on your far right.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030584_resize_zpsqfw2w04v.jpg)
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030587_resize_zpsgpwxrxkh.jpg)
The plate is screwed tight with the same screwes the speakers are tightened with. I took about 4 to make it tight enough.
Where the little pin sits, I drew a hole, so the plate is tightened as well.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030582_resize_zps8lzmule0.jpg)
Because on the backside I’ve got 4 plates standing, I needed to mill these out.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030573_resize_zpsdn3v30nx.jpg)
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030576_resize_zpsxowhdwb7.jpg)
Once I had this I could fit the plate. The plate will be inserted.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030597_resize_zpsww7id19x.jpg)
On the bottom you can see how it fits, and on top you’ll see the rings of the speakers mounted, and so you won’t see anything of the rest, simple.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030603_resize_zps7xbf3ybr.jpg)
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030629_resize_zpsggcynts4.jpg)
The the time had come to provide everything with a layer of carbon fiber.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030637_resize_zpshb8fqdc1.jpg)
Provided it with a couple of layer of epoxy.
Here you can see how I mounted the cover of the speakers without seeing anything of it.
On the backside I screwed 4 aluminum plates, and when you look closely , you'll see a little pin (3mm) on your far right.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030584_resize_zpsqfw2w04v.jpg)
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030587_resize_zpsgpwxrxkh.jpg)
The plate is screwed tight with the same screwes the speakers are tightened with. I took about 4 to make it tight enough.
Where the little pin sits, I drew a hole, so the plate is tightened as well.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030582_resize_zps8lzmule0.jpg)
Because on the backside I’ve got 4 plates standing, I needed to mill these out.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030573_resize_zpsdn3v30nx.jpg)
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030576_resize_zpsxowhdwb7.jpg)
Once I had this I could fit the plate. The plate will be inserted.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030597_resize_zpsww7id19x.jpg)
On the bottom you can see how it fits, and on top you’ll see the rings of the speakers mounted, and so you won’t see anything of the rest, simple.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030603_resize_zps7xbf3ybr.jpg)
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030629_resize_zpsggcynts4.jpg)
The the time had come to provide everything with a layer of carbon fiber.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030637_resize_zpshb8fqdc1.jpg)
Provided it with a couple of layer of epoxy.
![](http://i82.photobucket.com/albums/j272/robola/BMW%20Deuren%20evo3/P1030661_resize_zpskuohrzp2.jpg)
Comment